|
Kisan License Plate Mount Turn Signal LED Lights (Vectra Light, LP-16B/C)
3 in 1 Feature
Sequential Turn Signal
Right and Left LED arrays indicate sequential turn signals. These super bright LEDs (8500 mCd) have a wide viewing angle of 180 degrees. They are sunlight readable, even from the adjacent lanes.
Brake Light Modulator
A cluster of (6) LEDs is magnified by an acrylic lens to broadcast the Deceleration Warning sequence. As soon as you tap the brakes, they modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.
Running Lights
This is a programmable feature. For additional visibility, all LEDs stay ON at reduced intensity, but you can also turn this feature Off.
All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection.
Universal Mounting
Built-in mounting tabs are large enough to accept typical 1/4" (6mm) screws. The mounting tabs are 5.7" (145mm) apart, so they can be easily tucked under existing license plate.
Draws very little current (3/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires connecting to the turn signal and brake wires. You do not have to cut any wires, if you use the Scotchlok (T-Tap) connectors, which are also supplied.
vectraLIGHT LP-16can be mounted with the LED arrays on top or bottom of the license plate.
--------------------------------------------------------------------------------------------------------------
vectraLIGHT License Plate Frame Options.
For a little extra you can add a whole frame with lights!
Alloy License Plate Holder (Black. LPB-16)
The frame is die cast alloy for strength and durability. Powder coated in Black polyurethane with "Wrinkled finish" to match non-chrome European trim.
Designed to accept the most commonly used 7-1/2" license plates.
Draws very little current (3/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires connecting to the turn signal and brake wires. You do not have to cut any wires, if you use the Scotchlok (T-Tap) connectors, which are also supplied.
vectraLIGHT LPB-16 can be mounted with the LED arrays on top or bottom of the license plate.
Chrome License Plate Holder (Chrome. LPC-16)
The frame is die cast alloy for strength and durability. High gloss chrome finish is polished to perfection.
A sturdy backing plate and mounting hardware, also in chrome, are included. Designed to accept the most commonly used 7-1/2" license plates.
Draws very little current (3/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires connecting to the turn signal and brake wires. You do not have to cut any wires, if you use the Scotchlok (T-Tap) connectors, which are also supplied.
vectraLIGHT LPC-16 can be mounted with the LED arrays on top or bottom of the license plate.
Availability: Usually Ships in 24 Hours
Product Code: 12606
|
